The MasterLiquid ML360 Sub-Zero powered by Intel® Cryo Cooling Technology delivers a cooling solution unlike that of your traditional thermal solutions. Allowing the processor to be able to reach higher frequencies at lower voltages due to behavioral characteristics of silicon that can only be achieved through sub-ambient temperatures. Utilizing the unique combination of hardware, software and firmware to push the thermal limitations of your processor.

• 5V ARGB Lighting (Sync via M/B with 3-pin 5V ARGB Connector)
• 3* 120mm ARGB PWM Fans Included

• 5V ARGB Lighting (Sync via M/B with 3-pin 5V ARGB Connector)
• 2* 120mm ARGB PWM Fans Included

TH360 is an all-in-one 360mm liquid cooler that supports 5V RGB compatible motherboards.

• New Generation Dual Chamber Pump
• Enlarged Surface Area on Radiator
• New SickleFlow 120 RGB
• Reinforced Sealing for Anti-Leaking Prevention

• Aluminum Pump Design
• 360mm Radiator
• Integrated Fan design
• Fewer wires to worry about
• Addressable RGB LED Lighting
• Exclusive Wired ARGB Controller

• Anti-leak Tech Inside, exclusively safe.
• 25% more skived fins on the back side of the copper base, the heat absorption area extensively increased.
• Flow route optimized to reduce operation noise and energy loss.
• 3 specially tuned TF120 S fans are included (in matching the radiator’s properties).
• Customizable Logo, exciting DIY experience.
• Ultra large copper base, extensive compatibility (including TR4).
• 5V Addressable RGB, adjustable through motherboard or the included controller.

Features

• Anti-leak Tech Inside system equipped.
• Brand new water-block and fans built-in 12V RGB lighting system supports mainstream motherboards with synchronized lighting control
• E-shaped micro water-channel design can effectively enhance the heat circulation efficiency and enlarge the thermal contact area.
• Coming with 6 ultra-bright RGB LED lights, three in-built RGB effects (constant light, breathing and meteor and PWM control with super silent performance
• Ultra-large, pure copper CPU block provides effective coverage and heat dissipation for CPUs of any size
• The ceramic axle bearings and axle cores guarantee an ultra-long service life.
  Support Mainstream Intel & AMD Socket.
• Included controller.

Features

• Anti-leak Tech Inside liquid cooling system equipped.
• Double window panes and immersive ambient lighting ready to provide a perfect display of aesthetic illumination.
• 16.7 M true color RGB flowing light system with 5 in-built effects and 36 interchangeable lighting modes.
• Motherboard and controller Addressable RGB SYNC control supported*
• Ultra-large, pure copper CPU block provides effective coverage and heat dissipation for CPUs of any size.
• An optimized E-shaped micro water channel is designed to effectively enhance heat circulation efficiency and to enlarge heat contact areas.
• The ceramic axle bearings and axle cores guarantee an ultra-long service life.
• Supports mainstream INTEL and AMD socket mounting, including TR4/AM4.
• *WS2812B ADD-RGB LED is applied and the below 3pin ADD-RGB Headers are compatible for the device: 5V/D/G and 5V/D/NC/G, which is used for the mainstream M/B brands like ASUS, MSI, Gigabyte.

Software controlled 240mm liquid cooler designed for AMD and Intel motherboards, with addressable 16.8M colors LED water block, patented Riing Duo RGB fans and PWM function.

• Exclusive Tech
• Dual Dissipation
• Addressable RGB LED
• Push-Pull Fans
• Sleeved FEP
• Exclusive Wired ARGB Controller

• Easy and Reliable
  An easy install, reliable and low noise all-in-one liquid cooler for Intel and AMD systems
• Dual Dissipation Pump
  Its unique low-profile dual chamber pump design features a low vibration pump for cool and quiet operation.
• Robust FEP Tubing
  Robust and extra thick FEP tubing ensures kink-resistance to ensure full liquid flow-rate and eliminates potential evaporation.
• Air Balance Fan Design
  120mm Air Balance fan’s silent driver IC smoothens fan operation, reducing fan clicks and vibrations.
• Fits almost all cases
  Fits almost all PC chassis with a 120mm fan mount near the CPU area.